In October 2025 I tried to build my startup on top of LiteLLM.
At first it looked like the obvious choice. It supported many providers, it had
an OpenAI-compatible API, and it was already used by a lot of people. I did not
want to write an AI gateway. I wanted to build the product behind it.
Then I started running it on the hot path.
My opinion changed there.
A gateway is not a dashboard or integration glue you call once in a while. It
sits on every request, every retry, every stream, every tool call, every
fallback, every timeout.
A heavy gateway charges rent forever.
Most AI gateway comparisons miss that part. They talk about provider count,
dashboards, tracing, and "support for 1000+ models". Those things matter, but
they are not free. Before the gateway calls OpenAI, Anthropic, Gemini, vLLM, or
anything else, it has already spent your CPU, memory, cold-start time, and
operational budget.
I am not comparing full product maturity here. I am comparing how these gateways
behave on the hot path.
So I started writing GoModel: a small
open-source AI gateway and AI control plane in Go, with an OpenAI-compatible API
and explicit provider adapters.
When I launched GoModel on Hacker News,
I promised a real, reproducible benchmark. This article is that follow-up.
The benchmark question is simple:
How lean is each AI gateway when it sits on the request path?
That question runs through the whole benchmark: GoModel vs LiteLLM vs Portkey vs
Bifrost, measured by latency, throughput, memory, CPU, cold start, and image
size rather than landing pages or feature matrices.
Latency gets the easiest arguments. It rarely tells the whole story.
Most real LLM calls are dominated by inference time. If a model takes 2000 ms
to answer, the difference between 5 ms
and 15 ms
of proxy overhead is not
the main story.
The main story is the deployment envelope:
Those numbers decide whether the gateway can run where you want it to run.
A 372 MB
compressed image (1.2 GB
unpacked) that idles around gigabytes of
RAM and takes 25 s
to cold-start is a different operational thing than a
16 MB
image that peaks at 37 MB
of RAM and is serving traffic 0.56 s
after
launch.
So I care about the runtime footprint.
This benchmark does not prove that one gateway is best for every company.
I am not measuring:
Those things matter. Some of them matter a lot.
LiteLLM in particular has more integrated providers and more gateway features
than GoModel today. If your first requirement is maximum provider coverage right
now, LiteLLM has a real advantage. This benchmark does not erase that. It
measures the runtime footprint of putting each gateway on the request path. In
practice, many smaller or newer providers already expose an OpenAI-compatible
API, so provider count is not always the same as practical routing coverage.
The benchmark measures one narrower thing: runtime and deployment overhead on the request path.
That still matters, because the gateway is on the hot path. If you run high
request volume, local models, serverless workloads, edge workloads, or many small
model calls, the overhead stops being theoretical.
I tested four AI gateways people actually compare:
Every gateway talked to the same instant mock backend, on purpose. I did not
want to benchmark OpenAI, Anthropic, AWS networking, or random internet jitter.
I wanted to isolate the gateway itself.
Each gateway ran one at a time, in Docker, on an AWS c7i.large with
I first ran this on a free-tier t2.micro
. That was cheap and easy to
reproduce, but unfair to the heavier gateways. A 1 GiB machine cannot hold a
gateway that wants gigabytes of memory, so it starts swapping. At that point you
are benchmarking the host being too small.
So I moved to c7i.large
: still small, but non-burstable and large enough that
nothing swaps. It also makes the LiteLLM setup more honest. LiteLLM recommends
one worker per vCPU, and this machine has 2 vCPUs, so LiteLLM gets 2
workers. That gives it the multi-core access it is supposed to have instead of
pinning it to a single worker on a tiny box.
The test covered six workloads:
Each workload used 8,000
requests at concurrency 10
, across two trials with randomized gateway order. Latency is the
I would not call this a statistically exhaustive study. It is a reproducible
engineering benchmark, and the harness is public so people can rerun it, change
the machine, or add their own workloads.
A few details matter if you want to reproduce or criticize the numbers:
2
workers.Representative latency is chat completions, non-streaming. All resource figures
are measured under load on the same box.
| Metric | GoModel | Bifrost | Portkey | LiteLLM |
|---|---|---|---|---|
| Runtime | Go | Go | Node.js | Python |
Latency overhead p50 |
||||
1.8 ms |
||||
2.5 ms |
||||
9.7 ms |
||||
30.6 ms |
||||
Latency p99 |
||||
6.9 ms |
||||
18.3 ms |
||||
30.5 ms |
||||
39.3 ms |
||||
| Throughput (sustained) | 4900 req/s |
|||
3100 req/s |
||||
950 req/s |
||||
324 req/s |
||||
| Peak RAM under load | 37 MB |
|||
143 MB |
||||
112 MB |
||||
2.3 GB |
||||
| Efficiency (req/s per CPU %) | 52 |
|||
25 |
||||
8.2 |
||||
2.6 |
||||
| Cold start to first request | 0.56 s |
|||
7.1 s |
||||
1.1 s |
||||
25.5 s |
||||
| Docker image (compressed pull) | 16 MB |
|||
77 MB |
||||
59 MB |
||||
372 MB |
||||
| Workload coverage | 6/6 |
|||
6/6 |
||||
4/6 |
||||
6/6 |
||||
| Vendor-neutral core | Yes | Partial † | Yes | Yes |
| Core source available | Yes ‡ | Partial ‡ | Partial ‡ | Yes |
GoModel had the lowest median latency and the tightest tail: 1.8 ms
p50 and
6.9 ms
p99.
Bifrost was close on median latency at 2.5 ms
, which is a good result. The
gap opened at the tail and in memory: 18.3 ms
p99 and 143 MB
peak RAM under
load.
Portkey was heavier than I expected for this narrow proxy benchmark. It served
950 req/s
sustained and used 112 MB
peak RAM under load. In this setup it did
not serve the Anthropic /v1/messages
dialect, so it gets 4/6
workload
coverage. Treat that as a setup limitation, not a claim that Portkey cannot
support Anthropic in a fuller virtual-key configuration.
LiteLLM was the outlier. At its recommended worker count, it used about
2.3 GB
of RAM, cold-started in 25.5 s
, and sustained 324 req/s
.
Not because Python is morally bad. The language matters only when it changes the
deployment envelope. Here it does: memory floor, image size, cold-start time,
dependency graph, and throughput per core.
The later supply-chain incident around LiteLLM
also made me more confident in GoModel's design direction. A small Go binary
with a standard-library-heavy dependency tree is structurally less exposed to
that class of problem than a large Python dependency graph.
Forwarding JSON is not the hard part.
The hard part is provider drift.
OpenAI, Anthropic, Gemini, AWS Bedrock, Azure OpenAI, Groq, xAI, Cerebras, vLLM,
and local servers all disagree in small ways. Then they change those ways. Tool
calling changes. Streaming changes. Reasoning parameters change. Image inputs
change. Error formats change. Rate-limit semantics change.
An AI gateway or AI control plane has to absorb that without becoming magic.
GoModel's bet is not "support every model name on the internet".
The bet is:
For the same reason, GoModel starts as a small OpenAI-compatible gateway, not as
a dashboard with a proxy attached.
If all your traffic goes to a cloud model that takes several seconds to answer,
gateway overhead can look academic.
Local models change the math.
If you are routing through an AI gateway to vLLM, Ollama, LM Studio, llama.cpp,
or small specialized models on your own network, the model call can be much
faster. Then gateway overhead, cold starts, memory, and sidecar size matter more.
One reason I want GoModel to stay small: a gateway should be cheap enough to put
near the workload.
Bifrost is built by Maxim AI, an LLM
evaluation and observability platform. It routes to many model providers, but
the gateway also sits close to Maxim's eval and observability ecosystem. If you
want to choose your own eval platform, or stay independent from any eval
platform, ask whether Bifrost is the right match for you. Good software can
still have incentives attached. "Vendor-neutral" needs an asterisk here.
"Open-source" also needs care.
Portkey keeps observability storage, dashboard, multi-team RBAC, and at-scale
semantic caching in a closed managed tier. Bifrost's core gateway is Apache-2.0,
but its Enterprise edition adds closed or managed features. LiteLLM's proxy core
is MIT, but enterprise features like SSO, audit logs, and fine-grained access
control sit behind a proprietary commercial license.
GoModel is open-source today. Some enterprise-grade AI control plane features may
stay private. The core gateway is intended to remain useful without those private
features.
The benchmark is built to be self-verifiable. It provisions the AWS instance,
runs every gateway against the same backend, prints the tables, and destroys the
infrastructure.
./run.sh
One caveat: it runs on paid AWS infrastructure, not the free tier. A
c7i.large
is about $0.09
/hour and the run self-destructs within an hour or
two, so budget under $1 per run to be safe.
If you pass KEEP=1
or teardown fails, you keep paying until you destroy the
box, so double-check the teardown.
I did not start GoModel because I wanted another AI gateway in the world.
I started it because the gateway I wanted to use became part of the problem. It
sat on the hot path, but did not feel like hot-path software: too heavy, too
slow to start, too expensive to keep around, too large for the job.
This benchmark is the result of turning that frustration into numbers.
The numbers say GoModel is small in the places I care about: 16 MB
image,
37 MB
peak RAM, 0.56 s
cold start, 1.8 ms
p50, 6.9 ms
p99, and
4900 req/s
sustained throughput on a small AWS box.
LiteLLM still has more providers and more features today. Portkey and Bifrost
have their own strengths. But if the gateway is going to sit between your users
and every model call, I think it should first be cheap, predictable, and boring
to run.
GoModel is my attempt to build that kind of gateway.