Rumblex – word timestamps and subtitles from Rumble-2-Flash's CTC head Independent developer Edward Glockner released rumblex, a pip-installable transcription tool built on Reson8's 0.5B-parameter Rumble-2-Flash speech recognition model that derives word-level timestamps from the model's auxiliary CTC head by force-aligning decoder text to audio, reusing the encoder pass so alignment costs one linear layer plus a Viterbi search rather than a second model. rumblex splits long recordings with Silero VAD, batches transcription, adds optional per-word speaker labels via pyannote, and writes JSON, SRT, VTT (with optional per-word karaoke tags), TSV and TXT; on a LibriSpeech run with a vLLM server it decoded at 601× real time versus 467× without vLLM, at the same WER and timing error. The tool requires Python 3.11 or 3.12 and ffmpeg, runs on a 6 GB GTX 1060 in float32 at the default batch size of 8, and is not affiliated with Reson8. Transcription with word-level timestamps, speaker labels and subtitles, built on Reson8/Rumble-2-Flash https://huggingface.co/Reson8/Rumble-2-Flash . Rumble-2-Flash ships an auxiliary CTC head next to its decoder. rumblex uses it for word timestamps: the decoder writes the text, and the CTC head force-aligns that text to the audio. It reuses the encoder pass the decoder already ran, so alignment costs one linear layer plus a Viterbi search, not a second model. Rumble-2-Flash is a 0.5B-parameter speech recognition model fine-tuned from Qwen3-ASR-0.6B. Its model card https://huggingface.co/Reson8/Rumble-2-Flash lists 45 languages; the benchmarks here cover English and Dutch. rumblex is an independent project and is not affiliated with Reson8. - Reads anything ffmpeg can wav, mp3, m4a, mp4, mkv, ... . Long recordings are split into speech chunks with Silero VAD. - Batched transcription. A chunk's output doesn't depend on what it is batched with. The model's language , prompt context / hotwords , digits , filler and verbatim options are exposed. - Word timestamps from the CTC head. If alignment fails on a chunk, its words get proportional times instead, so a long job doesn't stop. - Optional speaker labels via pyannote, per word. Segments are split where the speaker changes. - Writes JSON, SRT, VTT optionally with per-word karaoke tags , TSV and TXT. Word times and speaker labels from one run, played back in real time over the audio's waveform. pip install rumblex pip install "rumblex diarize " with speaker labels pyannote You also need Python 3.11 or 3.12 and ffmpeg on PATH . pip takes PyTorch from PyPI, which is a CPU-only build on Windows. For a GPU on Windows, or for an older GPU, install torch and torchaudio for your CUDA version from pytorch.org https://pytorch.org/get-started/locally/ first. GPUs from Ampere on run in bf16, older ones e.g. Pascal in float32. A GPU is strongly recommended; the model runs on a 6 GB GTX 1060 in float32 at the default batch size of 8. CPU works but is slow. From source: git clone https://github.com/EdwardGlockner/rumblex && cd rumblex uv sync PyTorch's CUDA 12.6 builds, which still support Pascal uv sync --extra diarize The lock file pins PyTorch's CUDA 12.6 wheels on Linux and Windows and PyPI's build on macOS. For RTX 50-series GPUs which need CUDA 12.8+ , install torch yourself and use pip install -e . instead. rumblex meeting.mp4 all formats into the current folder rumblex talk.wav -f srt vtt --max line width 42 subtitles with cues split at 42 chars rumblex interview.m4a --language Dutch --diarize -f srt txt rumblex call.wav --prompt "Kubernetes, metoprolol" context / hotwords for the model python import rumblex model = rumblex.load model Reson8/Rumble-2-Flash, GPU if available result = rumblex.transcribe "meeting.mp4", model segments with word timestamps for seg in result.segments: print seg.start, seg.end, seg.text rumblex.write result result, "meeting.mp4", "out/", "srt", "json" More in examples/quickstart.py https://github.com/EdwardGlockner/rumblex/blob/main/examples/quickstart.py and examples/batch subtitles.py https://github.com/EdwardGlockner/rumblex/blob/main/examples/batch subtitles.py , which writes subtitles for a folder of files. On Linux with a recent NVIDIA GPU, decoding can run on a vLLM https://github.com/vllm-project/vllm server. pip install "rumblex vllm " adds the client; vLLM itself goes wherever the server runs: vllm serve Reson8/Rumble-2-Flash --max-model-len 4096 --gpu-memory-utilization 0.5 rumblex meeting.mp4 --vllm url http://localhost:8000/v1 Word timestamps still come from a local pass of the audio encoder, so leave GPU memory for it. On our LibriSpeech run this was 601× real time against 467× without vLLM, with the same WER and timing error docs/bench 2026-11-20 rtx4090 release https://github.com/EdwardGlockner/rumblex/blob/main/docs/bench 2026-11-20 rtx4090 release/README.md . The pyannote models are gated. Accept the conditions on pyannote/speaker-diarization-community-1 https://huggingface.co/pyannote/speaker-diarization-community-1 , then run hf auth login . pyannote.audio 4 sends usage telemetry by default. rumblex turns it off unless you set PYANNOTE METRICS ENABLED=true yourself. Both systems ran on the same audio on one rented RTX 4090, in one session, with the code released as 0.1.0: rumblex in bf16 at batch 32 the default is 8 , and WhisperX 3.8.6 with large-v3 in float16 at batch 16 with its default wav2vec2 aligners large-v3-turbo was not measured . The language was given to both. For the English sets rumblex ran with --no digits , since their references spell numbers out. WER uses Whisper's normalizers. Speed is one long file per dataset 20–60 min made from that dataset's audio, timed from decoded audio to aligned words with the models already loaded. Raw results, settings and caveats: docs/bench 2026-11-20 rtx4090 release https://github.com/EdwardGlockner/rumblex/blob/main/docs/bench 2026-11-20 rtx4090 release/README.md . | dataset | rumblex WER | WhisperX WER | rumblex speed | WhisperX speed | |---|---|---|---|---| | AMI meetings 500 utt. | 10.9% | 17.2% | 329× real time | 104× | | Earnings-22 calls 500 utt. | 9.3% | 10.6% | 430× | 102× | | LibriSpeech test-clean 200 utt. | 2.2% | 1.6% | 467× 601× with vLLM | 92× | | FLEURS Dutch 364 utt. | 9.2% | 7.0% | 380× | 79× | rumblex was 3–5× faster on every set. Over 40% of WhisperX's time goes to its alignment step 7–17 s per file ; rumblex's alignment reuses the encoder pass and took 0.3–0.9 s. rumblex had the lower WER on meetings and earnings calls, WhisperX on clean read speech and on Dutch. Most of rumblex's lead on AMI and Earnings-22 is fewer deleted words 177 vs 353 and 231 vs 427 . rumblex passes clips of up to 20 s to the model whole, while WhisperX runs its VAD on every clip, so on long recordings, where both use a VAD, the gap may be smaller. These are samples of a few hundred utterances per set, and speeds also depend on the host CPU. The model card https://huggingface.co/Reson8/Rumble-2-Flash reports 6.05% on FLEURS Dutch under the Open ASR Leaderboard's scoring, which we did not reproduce. An earlier diagnostic run vLLM vs transformers, bf16 vs float32, with and without VAD gave 9.2–9.6% every time, so none of those pipeline choices explains the gap. Part of it is that FLEURS mixes digits and spelled-out numbers in its references docs/bench 2026-11-20 rtx4090 diagnose https://github.com/EdwardGlockner/rumblex/blob/main/docs/bench 2026-11-20 rtx4090 diagnose/README.md . Measured on the 200 LibriSpeech utterances in the same run, against Montreal Forced Aligner reference alignments. The settings were chosen on dev clean docs/alignment eval.md https://github.com/EdwardGlockner/rumblex/blob/main/docs/alignment eval.md . | mean absolute error | rumblex | WhisperX | |---|---|---| | word start | 58 ms | 75 ms | | word end | 57 ms | 34 ms | The Rumble encoder produces 13 frames per second 80 ms apart within each second , while WhisperX's aligner works at 20 ms, and that shows in the word ends. rumblex moves a word's end back to where the audio goes quiet, which brought its end error down from 75 to 57 ms in development. The reference is another forced aligner, not human labels. 1. ffmpeg decodes the audio to 16 kHz mono. 2. Silero VAD finds the speech, running over many stretches of the file at once on the GPU if there is one . Speech is packed into chunks of up to 20 s. Pauses under 0.5 s don't split speech unless a chunk would run past 20 s, and pauses over 2 s never end up inside a chunk. Audio of 20 s or less skips VAD and goes in whole. 3. Rumble-2-Flash transcribes the chunks in batches. A hook keeps the encoder's ln post states 13 frames/s . 4. The CTC head and a Viterbi search align the decoder's own tokens to those states. Tokens are grouped into words at the leading-space marker. A word ends where the next one starts, or earlier if the audio goes quiet before that. 5. Optionally, pyannote labels speakers and each word takes the speaker it overlaps most. 6. The writers produce JSON, SRT, VTT, TSV and TXT. Model details measured for this project: docs/model inspection.md https://github.com/EdwardGlockner/rumblex/blob/main/docs/model inspection.md . - Word timing resolution is limited by the encoder's frame rate 13 per second . Word ends in particular are less precise than WhisperX's 20 ms aligner 57 vs 34 ms mean error on LibriSpeech . - Each chunk is decoded on its own, so a sentence that runs across a chunk boundary in long audio can be broken there, sometimes with a capital letter mid-sentence. - Words are split at spaces, so languages written without spaces Chinese, Japanese get one "word" per chunk. - On clean read English and on FLEURS Dutch, WhisperX large-v3 had the lower WER in our runs. Only English and Dutch have been measured. - Speaker labels need the diarize extra and access to pyannote's gated models. - The vLLM backend needs Linux and a GPU vLLM supports. uv sync --extra dev uv run pytest uv run ruff check . && uv run ruff format --check . Benchmarks and research scripts: scripts/README.md https://github.com/EdwardGlockner/rumblex/blob/main/scripts/README.md . Every measured number in this README links to its raw results; the full list is in docs/README.md https://github.com/EdwardGlockner/rumblex/blob/main/docs/README.md . Apache-2.0. Rumble-2-Flash is Apache-2.0 as well. The pyannote models have their own terms.