{"slug": "remarkable-observatory-receives-orbital-radio", "title": "Remarkable Observatory Receives Orbital Radio", "summary": "Tommy Lather released Starlab Observatory, an open-source GitHub project that pairs an ESP32-controlled antenna switch with an Ubuntu computer running Python software to predict satellite passes and automatically select the matching receiver and antenna combination for logging and processing received data. Lather built the system after an initial attempt to receive ISS image transmissions with a cheap RTL-SDR receiver and antenna produced mixed results, and the setup now runs multiple reception jobs at once. The project is documented on Hackster.io.", "body_md": "There’s nothing quite so nostalgic as the time honored tradition of tuning across the HF bands, picking out signals from the noise. Add satellites and VHF/UHF to the mix, then replace the old shortwave receiver with a smattering of software-defined radios. With an ESP32 controlled antenna switch (and the matching antennae), some Python, and a dash of Claude Code, and you’re approaching what [Tommy Lather] has done with his [Starlab Observatory](https://www.hackster.io/tommy-lather/starlab-observatory-6b2d6f).\n\nDetermined to find out what was inhabiting his local electromagnetic spectrum, [Tommy] picked up a cheap RTL-SDR receiver and an antenna. The goal? Receiving some ISS image transmissions. The results? Let’s say *mixed*. But it lit a fire, and soon, he had more hardware than he could handle on his own. The slope became slippery, and before he knew it, the Starlab Observatory was an [Open Source GitHub Project](https://github.com/TommytheMonkey/starlab_observatory)!\n\nWhat makes it an Observatory instead of a random menagerie of radio memorabilia? Intelligence. An ESP32 based antenna switch takes  commands from a dedicated Ubuntu computer. The PC, running [Starlab](https://github.com/TommytheMonkey/starlab_observatory), predicts satellite passes, and selects the correct receiver and antenna combination to receive data, which then gets logged and processed. Multiple jobs can run at once. The RF spectrum doesn’t stand a chance!\n\nWe have to wonder if a [fully programmable az-el mount such as the AntRunner](https://hackaday.com/2022/09/17/antrunner-is-the-satellite-antenna-mount-you-need-to-take-with-you/) isn’t in [Tommy]’s near future!", "url": "https://wpnews.pro/news/remarkable-observatory-receives-orbital-radio", "canonical_source": "https://hackaday.com/2026/11/18/remarkable-observatory-receives-orbital-radio/", "published_at": "2026-11-18 16:30:34+00:00", "updated_at": "2026-11-18 16:41:30.447199+00:00", "lang": "en", "topics": ["ai-tools", "developer-tools"], "entities": ["Tommy Lather", "Starlab Observatory", "ESP32", "RTL-SDR", "GitHub", "Hackster.io", "Ubuntu", "Python"], "also_reported_by": [], "takeaway": "An ESP32 antenna switch driven by a Python scheduler on an Ubuntu PC can predict satellite passes and automatically route each job to the correct receiver and antenna, letting one station run multiple reception jobs concurrently.", "recommendation": null, "alternates": {"html": "https://wpnews.pro/news/remarkable-observatory-receives-orbital-radio", "markdown": "https://wpnews.pro/news/remarkable-observatory-receives-orbital-radio.md", "text": "https://wpnews.pro/news/remarkable-observatory-receives-orbital-radio.txt", "jsonld": "https://wpnews.pro/news/remarkable-observatory-receives-orbital-radio.jsonld"}}