Qualified AM opens QamX to wider AM industry Qualified AM opened its QamX software platform to the wider additive manufacturing industry at Formnext 2026 after roughly two years of development, combining AI-supported risk assessment with standards-based qualification workflows, evidence management and reporting. The German company introduced a €990 net QamX Qualification Pass at the show, giving one organization four active months of QamX Foundation covering one qualification project, two role-based users, one production site, the RISK, QMS, CERT and SCM modules, the Qami AI assistant, ISO/ASTM 52920 plus two additional standards, and two hours of senior expert support, followed by eight months of read-only access. Founder and CEO Gregor Reischle said the methodology behind the platform draws on almost two decades of industrial AM experience, with work starting in 2014 on an approach that evolved from DIN SPEC 17071 into ISO/ASTM 52920, and Qualified AM describes Qami as "AI supported, human-approved," leaving qualification and approval decisions with engineers. German engineering and qualification specialist Qualified AM https://qualifiedam.com/ has opened its QamX software platform to the wider additive manufacturing industry at Formnext 2026 https://3dprintingindustry.com/news/what-to-see-at-formnext-2026-a-guide-to-featured-exhibitors-256172/ , following approximately two years of software development. The platform combines AI-supported risk assessment with standards-based qualification workflows, evidence management and reporting for additive manufacturing equipment, materials, production processes and parts. Qualified AM is also introducing a €990 QamX Qualification Pass at Formnext as an entry point for companies undertaking an initial qualification project. The commercial release expands access to the QamX platform https://3dprintingindustry.com/news/qualified-am-launches-qamx-246321/ , which Qualified AM introduced ahead of Formnext 2025. The software brought compliance management, risk assessment and supplier traceability into a shared digital environment, with modules covering certification, quality management, supply chains and production risk. The 2026 offering builds on Qualified AM’s work in additive manufacturing qualification and standards development. Founder and CEO Gregor Reischle said the underlying methodology has been developed through almost two decades of industrial AM experience, with work beginning in 2014 on an approach that evolved from DIN SPEC 17071 into ISO/ASTM 52920. From qualification requirements to structured evidence Qualification is particularly important as additive manufacturing moves into regulated production, where a successful print alone does not demonstrate that a manufacturing process can consistently produce parts meeting defined requirements. QamX structures this process across equipment and materials, production capability, individual parts and supporting evidence. Its four software modules cover risk assessment RISK , quality management QMS , qualification and compliance reporting CERT , and supply-chain management SCM . An AI assistant called Qami supports engineers with standards interpretation, risk identification, mitigation suggestion and evidence-gap analysis. Qualified AM describes the approach as “AI supported, human-approved,” with engineers and other responsible parties retaining qualification and approval decisions. “QamX does not remove the engineering needed to prove that something is safe and qualified. It removes the need to rebuild the qualification logic around that engineering every time,” said Reischle. The platform builds around ISO/ASTM 52920, which defines qualification principles and quality assurance requirements for industrial AM production. Reischle has convened the relevant ISO/ASTM joint group on AM qualification principles since 2018. €990 entry point for qualification projects The new QamX Qualification Pass costs €990 net and provides one organization with four active months of QamX Foundation. It covers one qualification project, two role-based users and one production site, alongside access to the RISK, QMS, CERT and SCM modules and Qami AI assistant. ISO/ASTM 52920 and two additional applicable AM standards or specifications are included, as are evidence storage, compliance and gap reporting, and two hours of senior qualifications expert support. The active period is followed by eight months of read-only access to project documentation, evidence and reports. Additional projects, users, production sites, standards and AI capacity can be added separately. Audits, certification-related assessments, additional standards configuration and further expert services are not included in the €990 price and are commissioned separately. Qualified AM says QamX does not replace independent certification or conformity assessment. Where an external audit or formal approval is required, the relevant auditor, certification body or notified body retains responsibility for the decision, while QamX structures the evidence used to support the assessment. QamX applied to WAAM qualification Qualified AM is currently using the methodology on a wire arc additive manufacturing WAAM production qualification project with German industrial manufacturer Vogelsang https://www.vogelsang.info/en/ . The project covers a defined manufacturing configuration comprising an ABB industrial robot, a Fronius welding system, specified materials and controlled process parameters. ISO/ASTM 52920 provides the core qualification framework, supplemented by ISO/ASTM 52943 and applicable welding requirements including ISO 3834, ISO 15614, ISO 9606 and ISO 14732. Within QamX, these requirements are connected with WAAM failure modes, production and build risks, component-use and lifetime risks, mitigation measures, validation activities, equipment and material records, work instructions, testing and qualification evidence. Changes in geometry, first-layer conditions, wall thickness and base-plate configuration can require different parameter sets, with each requiring appropriate validation evidence within the qualified production scope. Qualified AM estimates that the initial QamX risk assessment for the Vogelsang project takes approximately one to two focused working days once its standards and project structure have been configured. The physical qualification process is expected to take approximately ten months to one year, as testing, validation, documentation, gap closure and auditing still need to be completed. The distinction illustrates where Qualified AM sees the software delivering efficiency; reducing repetitive qualification planning and evidence-management work rather than replacing the engineering required to validate production. The company says suitable applications can be up to 20 times more efficient using its accumulated qualification methodology and reusable knowledge. However, Reischle describes this as an experience-based estimate from Qualified AM’s projects rather than an independently verified benchmark or guaranteed result. Building reusable qualification infrastructure Elements of the QamX approach have already been applied across other industrial AM qualification projects. Qualified AM says one Deutsche Bahn https://int.bahn.de/en/ project progressed from kick-off to a qualified AM production site in approximately three months, including quality-management-system development, auditing and evidence-based gap closure. At University Hospital Münster https://www.ukm.de/university-hospital-muenster , ISO/ASTM 52920 was integrated into an ISO 13485-certified quality environment for a personalized aortic-arch application. The platform has also supported evidence and traceability during a Stage 2 equipment-certification audit of Fieldmade https://fieldmade.com/ ’s NOMAD 03 system and was used during an operational qualification exercise at the European Defence Agency’s AM Village 2026. QamX is also being used in DILAPRO, an EU co-funded project developing digital tools for laser-based manufacturing. Within the project, DILAFACT generates production and process data, while DILACERT uses the QamX environment to assess digital evidence against qualification requirements and criteria. The approach is intended to connect production data with structure qualification evidence while maintaining independent review and conformity-assessment responsibilities. Qualified AM is demonstrating QamX at Formnext 2026 from 17 to 20 November at Hall 12.1, Booth C71-1 in the Bayern Innovativ Pavilion. Daily live demonstrations are scheduled for 12:00 and 17:00, including walkthroughs of the Vogelsang WAAM qualification project and the DILAPRO/DILACERT workflow. Vote now in the 2026 3D Printing Industry Awards https://3dprintingindustry.com/news/voting-opens-for-the-2026-3d-printing-industry-awards-meet-this-years-nominees-256219/ . Stay up to date with the latest 3D printing news. Subscribe to the 3D Printing Industry newsletter or follow us on LinkedIn . Explore the full Future of 3D Printing and Executive Survey series from 3D Printing Industry, featuring perspectives from CEOs, engineers, and industry leaders on the industrialization of additive manufacturing , 3D printing industry trends 2026 , qualification, supply chains, and additive manufacturing industry analysis . Featured image shows Overview of QamX platform. Image via Qualified AM.