# Neat ADF scanner (USB 1f44:0050): Reverse engineered the Neat ADF scanner USB protocol for Home Assistant with Claude

> Source: <https://reversedwithai.com/p/neat-adf-scanner-usb-protocol-home-assistant-claude>
> Published: 2026-11-20 10:44:22+00:00

**Key takeaway:** A proprietary scanner protocol absent from SANE can be reverse engineered from a USB capture of the vendor's Windows driver, but the resulting 300 dpi scan programs embed the author's own unit's shading tables, so other scanners need their calibration values captured separately.

## What was done

The README says the proprietary Neat protocol, absent from SANE, was reverse engineered from a USB capture of the Windows driver. All 20 commits carry Claude Sonnet 5.5 trailers.

This Home Assistant integration drives the Neat ADF scanner (USB 1f44:0050) shared over the network with USBAnywhere or a standard usbipd server. The README says the Neat protocol is proprietary and not in SANE, and was reverse engineered from a USB capture of the Windows driver. The result is written up in docs/PROTOCOL.md.

### How it was done

All 20 commits carry a Claude Sonnet 5.5 co-author trailer. The repository holds the integration and documentation and no vendor driver files.

### Results

The README reports scanning verified on real hardware at 300 and 600 dpi in colour, plus derived modes, with double-sided scanning, scanner-button events and paper and cover sensors. It notes that the 300 dpi scan programs contain the shading tables of the author's own unit, and gives steps to capture calibration values for another scanner.

## Discussion

[Your library](https://reversedwithai.com/library)

## Sources

Sources reviewed · Added

An AI model drafted this entry from the sources above. An automated check matched its claims against them on 20 Nov 2026. The figures are the author's. [How entries are checked.](https://reversedwithai.com/about#method) [Something wrong? Tell me.](https://reversedwithai.com/policy#takedown)
