cd /news/artificial-intelligence/fabrex-launches-rex-an-ai-agent-for-… · home › topics › artificial-intelligence › article
[ARTICLE · art-171618] src=3dprintingindustry.com ↗ pub= topic=artificial-intelligence verified=true sentiment=↑ positive

Fabrex Launches Rex, an AI Agent for AM Workflows at Formnext 2026

Fabrex launched Rex, an AI agent that combines quoting, nesting, slicing and machine execution into a single additive manufacturing workflow, at Formnext 2026, which runs November 17 to 20 in Frankfurt. Fabrex calls Rex "the factory brain" and targets industrial operations with many product references in small production volumes; its website shows Rex drafting a quote for 100 PA12 bead-blasted parts with five cost lines (setup and preparation, material, printing, finishing, quality checks), though Fabrex notes the examples are illustrative and do not run live part analysis or quoting. Rex groups parts by geometry, material, quantity and lead time, prepares files for powder-bed, resin and filament printers, sends jobs to machines and monitors status, competing with AMIS and Phasio, which will demo a connected AM workflow at the same event.

key takeaway

Rex consolidates quoting, nesting, slicing and machine execution into one agent that groups parts by geometry, material, quantity and lead time and generates quotes with five itemized cost lines, but Fabrex's published examples are illustrative and do not run live part analysis.

by read4 min views2 publishedNov 18, 2026
Fabrex Launches Rex, an AI Agent for AM Workflows at Formnext 2026
Image: 3Dprintingindustry (auto-discovered)

Manufacturing software company Fabrex has launched Rex at Formnext 2026, which runs from November 17 to 20 in Frankfurt. Rex is an artificial intelligence agent that brings four stages of additive manufacturing into a single workflow: quoting, nesting (laying out parts for a build), slicing (preparing the print file) and machine execution.

On its website, Fabrex calls Rex “the factory brain.” It describes the agent as a manufacturing AI that creates quotes, organizes work in batches and keeps factory knowledge in the work from sales to delivery.

Fabrex is aiming Rex at industrial environments that handle a wide variety of product references in small production volumes. The company says the goal is to reduce manual tasks and improve production efficiency. Its website says the approach starts from parts, jobs and production decisions, not from a generic office workflow.

Quoting Through Conversation

The Fabrex website shows Rex in a conversational format. In one example, a user asks Rex to quote 100 PA12 parts with a bead-blasted finish and to break down the costs. Rex asks whether this is a new order with standard delivery. It then returns a quote draft, marked for review, with five cost lines: setup and preparation, material, printing, finishing and quality checks. Each line shows its basis. One setup is shared across all 100 parts, material is calculated from part volume multiplied by quantity, and printing is based on build time and allocated capacity. The site notes that its examples are illustrative and do not run a live part-analysis or quoting service.

According to Fabrex, customers can keep their quoting rules, including cost formulas, customer requests, quote revisions and approvals, together in a custom app. The company says part geometry stays with the job, the batch and the next handoff. The site shows a reference part that can be explored in 3D and X-ray views alongside its engineering drawing.

From Accepted Quote to Machine

Once a quote is accepted, Rex uses four pieces of order data to group compatible parts and optimize their layout: part geometry, material, quantity and lead time. It then prepares the manufacturing files according to each machine’s parameters. Fabrex says Rex works with powder-bed, resin and filament 3D printers from various manufacturers. Rex also sends jobs to the machines and monitors their status.

Fabrex pairs the agent with custom apps. Its website shows illustrative workspaces for five stakeholders: sales, engineering, production, quality and delivery. One of them is a production board that lists job priorities and owners across stages such as queued, in production and next operation. The company suggests starting with one practical problem and refining the app as operations and requirements change.

According to Fabrex, the solution ensures approval by production managers and traceability of decisions. The company’s website says people stay part of the loop and that teams get a shared place to review information and make the next decision.

The Gap Between Quoting and the Build Plate

Fabrex is going after a problem additive manufacturing has had for a long time: quoting, production management and build preparation have usually run as separate systems. Rex tries to bring all three into a single agent instead of linking separate tools together.

Other companies are working on a similar gap, and some will also be in Frankfurt. AMIS and Phasio will demo a connected AM workflow at Formnext 2026. In a live challenge, a human expert will nest builds by hand while Phasio will send an entire production backlog to AMIS Runtime, the automated version, in a single action. The engine is already running in production. In March, 3D People deployed AMIS Runtime to automate build preparation at its London facility, where it continuously re-nests parts as new orders enter the queue.

At the quoting stage, AI assistants are starting to connect to manufacturers’ pricing systems. In October, 3Descu enabled 3D printing quotes through ChatGPT and Claude using the Model Context Protocol. As with Rex, a person still has the final say: automated quoting does not extend to order placement or production approval. Earlier tools focused on reading incoming requests. Examples include AMFG’s Sentinel AI for 2D drawing analysis and DigiFabster’s AI Quote Agent.

Automation in AM software is moving toward one connected workflow from quote to build. Formnext will show which approach is ready for the factory floor.

Voting is open for 2026 3D Printing Industry Awards. Have your say now! To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on LinkedIn*.*

Explore the full Future of 3D Printing and Executive Survey series from 3D Printing Industry, featuring perspectives from CEOs, engineers, and industry leaders on the industrialization of additive manufacturing*,* 3D printing industry trends 2026*, qualification, supply chains, and* additive manufacturing industry analysis*.*

Featured image shows Fabrex will present Rex at Formnext – Where ideas take shape 2026. Image via ADDIMAT.

── more in #artificial-intelligence 4 stories · sorted by recency
── more on @fabrex 3 stories trending now
sponsored brought to you by zahid.host 4,200+ EU-deployed projects
reading about agents? ship yours in a single git push.

Run your AI side-project on zahid.host

EU-based hosting, git-push deploys, automatic HTTPS, no cold starts. Free tier with a custom domain — perfect for shipping the agent you just read about.

$git push zahid main
→ Live at https://your-agent.zahid.host ✓
Get free account → Pricing
from €0/mo · no card required
LIVE [news/fabrex-launches-rex-…] indexed:0 read:4min 2026-11-18 · —