Black Forest Labs Releases FLUX 3 Action: A 7B Open-Weights World Action Model That Tops RoboLab-120

Black Forest Labs released FLUX 3 Action, a 7B open-weights World Action Model for robot control that ranks first on the RoboLab-120 leaderboard at 42.92% task success, ahead of NVIDIA's 16B Cosmos 3 Nano at 36.8% and π0.5 at 28.0%. The DROID policy needs about 32 GB of GPU memory in BF16 on an H200, fits 24 GB cards with FP8 quantization and text encoder offload, and ships under the non-commercial FLUX Kommunity License in three recipes (base, guidance-distilled, step-distilled), each in BF16 and FP8. In a blind Positronic Robotics evaluation on a Franka arm across 10 DROID tasks and 3 attempts each, FLUX 3 Action completed 28 of 30 attempts (93.3%), versus 27/30 for Cosmos 3 Nano, 20/30 for DreamZero and 13/30 for π0.5.

Black Forest Labs BFL , the lab behind the FLUX image models, has released FLUX 3 Action https://bfl.ai/models/flux-3-action . It is a 7B open-weights World Action Model WAM for robot control. The model reads camera frames, robot state and a text instruction. It then predicts future video frames and the next chunk of actions together. On the RoboLab-120 leaderboard https://research.nvidia.com/labs/srl/projects/robolab/leaderboard.html , it ranks first at 42.92% task success. Is it deployable? Yes, with conditions. The DROID policy needs about 32 GB of GPU memory in BF16 on an H200. It fits 24 GB cards with FP8 quantization and text encoder offload. The FLUX Kommunity License https://huggingface.co/black-forest-labs/flux-3-action-droid/blob/main/LICENSE.md allows non-commercial use. The Trade-off FLUX 3 Action Targets Open robot policies usually force a choice. WAMs like NVIDIA’s Cosmos 3 Nano https://arxiv.org/abs/2606.02800 lead RoboLab at 36.8%, but predicting video is expensive. VLAs like π0.5 https://arxiv.org/abs/2504.16054 are fast, but reach only 28.0%. On a B200, BFL measured that Cosmos 3 Nano FP8 needs about 4.7x more processing time than π0.5 BF16 per second of robot motion. FLUX 3 Action keeps joint video and action prediction. BFL closes the speed gap with a smaller backbone and distillation instead. Architecture and Training FLUX 3 Action is derived from the multimodal FLUX 3 https://bfl.ai/blog/flux-3 backbone. Pretraining used image, video and audio data, and video made up over 95% of training tokens. Text, video and robot state are encoded into tokens. The backbone’s future tokens are decoded into video frames, and its action tokens into robot actions. Midtraining mixed pretraining data 36.95% of samples with action-aligned video 63.05% . The action data covered game recordings, egocentric human hand video, handheld grippers and teleoperation across 14 embodiments. Most robot data uses a shared 50-dimension end-effector action space called EE50. Pretraining matters a lot here. Without it, DROID-only training stayed below 1% on RoboLab. With pretraining, the same protocol reached 11.6%. Benchmark Results RoboLab-120 has 120 tabletop tasks in Isaac Sim, with 10 trials each on a DROID https://droid-dataset.github.io/ -style Franka setup. | Model | Type | Params | RoboLab-120 | |---|---|---|---| | FLUX 3 Action | WAM | 7B | 42.92% | | Cosmos3-Nano-Policy | WAM | 16B | 36.8% | | π0.5 | VLA | 3.3B | 28.0% | | DreamZero | WAM | 14B | 25.7% | | GR00T N1.6 | VLA | 3B | 7.2% | That is a 6.1 percentage point lead with 56% fewer parameters than Cosmos 3 Nano. The 42.92% figure is the leaderboard entry. BFL’s multi-seed mean for the guidance-distilled FP8 checkpoint is 42.24% ± 0.36. Real hardware results follow the same pattern. Positronic Robotics https://positronic.ro/ ran a blind evaluation on a Franka arm with 10 DROID tasks and 3 attempts each. FLUX 3 Action completed 28 of 30 attempts 93.3% . Cosmos 3 Nano scored 27/30, DreamZero 20/30 and π0.5 13/30. 3 Checkpoints, 3 Speed Points BFL ships the DROID policy https://huggingface.co/black-forest-labs/flux-3-action-droid in 3 recipes, each in BF16 and FP8: - Base: 4 sampling steps with split guidance video CFG 4, action CFG 1 . - Guidance-distilled: drops the second guidance pass, runs 1.8x to 2x faster and scores 0.6 to 1.08 pp higher. - Step-distilled: 1 sampling step, 3.15x to 4x faster, with a 3.51 to 4.32 pp drop in success. Against Cosmos 3 Nano in FP8, the base and guidance-distilled checkpoints run 1.52x to 3.95x faster across consumer, workstation and datacenter GPUs. Each call yields 32 actions at 15 Hz, or 2.13 seconds of motion. π0.5 yields 1.0 second per call. So BFL reports speed as real-time factor, not per-call latency. In FP8, the step-distilled checkpoint beats π0.5 by 1.34x to 2.28x on workstation and datacenter GPUs. On an RTX 5090, it is slower than π0.5. Pairing a Fast Policy With a Reasoner BFL also tested hybrid control with GPT 6 Astra, following the Su et al. 2026 setup. The reasoner can execute, edit or replace the policy’s predicted actions. With FLUX 3 Action and low reasoning effort, the hybrid solved 90% of episodes at $8.77 and 8m 08s per success. Pure Astra at maximum effort solved 100%, but cost $13.47 and 16m 23s per success. Fine-Tuning, LeRobot and Jetson AI teams can fine-tune FLUX 3 Action on their own demonstrations. BFL published a DROID recipe and an SO-101 LoRA recipe https://docs.bfl.ai/flux 3/flux3 action so101 . Its docs show an SO-101 pick-and-place skill learned from about 200 demonstrations. With NVIDIA, BFL integrated the model natively into Hugging Face LeRobot https://huggingface.co/docs/lerobot/main/en/flux3 , and it supports edge deployment on NVIDIA Jetson. The docs https://docs.bfl.ai/flux 3/flux3 action overview also include game-playing and simulated drone examples. python from lerobot.policies.flux3 import Flux3Policy from lerobot.policies.factory import make pre post processors repo id = "black-forest-labs/flux-3-action-droid" policy = Flux3Policy.from pretrained repo id preprocessor, postprocessor = make pre post processors policy.config, pretrained path=repo id The model outputs joint targets with no built-in velocity, force or workspace limits. Your application must enforce those limits. Key Takeaways - 7B WAM ranks first on RoboLab-120 at 42.92%. - Leads Cosmos 3 Nano by 6.1 pp with 56% fewer parameters. - Up to 3.95x faster than Cosmos 3 Nano in FP8. - Plans 2.13s of motion per call versus 1.0s for π0.5. - Weights, code and recipes ship under the FLUX Kommunity License. Check out the full technical report https://bfl.ai/models/flux-3-action , model weights https://huggingface.co/collections/black-forest-labs/flux-3-action , GitHub repo https://github.com/black-forest-labs/flux-action and docs https://docs.bfl.ai/flux 3/flux3 action overview . All credit goes to the researcher of this project. Also, feel free to follow us on Twitter https://x.com/intent/follow?screen name=marktechpost and don’t forget to join our 150k+ML SubReddit https://www.reddit.com/r/machinelearningnews/ and Subscribe to our Newsletter https://magic.beehiiv.com/v1/f5e63dd4-5653-4f09-83e2-321a8b1ba526?email={{email}} . Wait are you on telegram? now you can join us on telegram as well. https://t.me/machinelearningresearchnews Need to partner with us for promoting your GitHub Repo OR Hugging Face Page OR Product Release OR Webinar etc.? Connect with us https://forms.gle/MJjjVDPS7whH8Ngs6 Asif Razzaq is the CEO of Marktechpost AI Media Inc.. As a visionary entrepreneur and engineer, Asif is committed to harnessing the potential of Artificial Intelligence for social good. His most recent endeavor is the launch of an Artificial Intelligence Media Platform, Marktechpost, which stands out for its in-depth coverage of machine learning and deep learning news that is both technically sound and easily understandable by a wide audience. The platform boasts of over 2 million monthly views, illustrating its popularity among audiences.