# An O(x)Caml book that runs > Source: > Published: 2026-06-13 13:11:04+00:00 # An O(x)Caml book that runs 13 Jun 2026I am building a course, “Functional Programming with OCaml”, for the [NPTEL](https://onlinecourses.nptel.ac.in/e-learning/preview/noc26_cs90) MOOC platform: twelve modules, recorded lectures, the works. The [course book](https://fplaunchpad.org/ocaml_nptel) is not a PDF and not a website with code listings you copy elsewhere. It is a website where the code runs, in your browser, with nothing installed and no server behind it. The first half is OCaml; the last few modules cross into OxCaml. An O(x)Caml book, and one that runs. This post is about why I built it that way, how I wrote it (with a lot of help from an LLM, under careful review), and the pieces I think are genuinely new. ## Zero to OCaml in zero steps The single biggest obstacle a beginner hits with any language is not a concept. It is the install. OCaml has gotten much better here over the years. The [OCaml Platform extension](https://github.com/ocamllabs/vscode-ocaml-platform) for VS Code will install a compiler toolchain for you, and the [ dune](https://dune.build/) build system and the [package manager have all worked seamlessly together for years now. But that is the experience for someone who already knows they want VS Code, knows what a switch is, and knows what to do when a step does not go as the happy path describes. For a beginner, the path from “I have a laptop” to “I ran my first OCaml program” still has non-trivial steps, and the failure modes are exactly the ones a beginner is least equipped to debug.](https://opam.ocaml.org/) `opam` I have lost count of the hours spent at the start of hands-on workshops just getting OCaml onto people’s machines. [Anil Madhavapeddy](https://anil.recoil.org/) once told me that he and [Yaron Minsky](https://github.com/yminsky) spent almost the entire session of their [2013 CUFP OCaml tutorial](http://cufp.org/2013/t2-yaron-minsky-anil-madhavapeddy-ocaml-tutorial.html) getting OCaml installed on attendees’ laptops. I have done my share of the same, walking a room through `opam` , and more than once apologising for the state of Windows support. That last apology I no longer have to make, thanks to the opam team’s work over the past few years (see the [opam 2.2.0 alpha announcement](https://ocaml.org/backstage/2023-07-04-opam-2-2-0-alpha) on native Windows). I have had my own forays into fixing the broader problem: OCaml [Jupyter](https://jupyter.org/) notebooks wrapped in a [Docker](https://www.docker.com/) container (I wrote about [teaching with Jupyter notebooks](/ocaml/prolog/jupyter/notebooks/2020/01/19/OCaml-Prolog-Jupyter/) years ago, and that is how I taught CS3100), and more recently devcontainers for workshops. The [OxCaml ICFP tutorial](https://github.com/avsm/oxcaml-icfp-tutorial) and our [learn-ocaml workshop](https://github.com/fplaunchpad/learn-ocaml-workshop-2026) materials both lean on containers too. These work, but only in the right setting. In a classroom where people can spend a couple of hours getting dependencies in place, fine. On conference wifi, for a two-hour tutorial, downloading a devcontainer or a Docker image takes all the fun out of programming before any programming has happened. What I wanted was zero to OCaml in zero steps. No install. And, just as importantly, no servers for me to administer. But still a seamless experience where a learner can change code and execute it. You are reading the book right now, in a sense. Here is a live cell. If you are in a browser, there is a Run button near the top right. Click it. Change `"reader"` to your own name and run it again. The OCaml toplevel just ran in your browser. No server, no install, and the bytes never left your machine. ## Why purely client side The best thing about programming is that you can poke at it: change something, watch how it reacts, and learn from the reaction. Books cannot be poked. The usual fix is to read with an editor open alongside and type things in, but that always feels slightly off, because the book cannot assume you are playing along. It has no way to know you have the same compiler version, the same libraries, the same anything, so the interactive part drifts out of sync with the prose. I wanted the opposite: a book that assumes you are playing with it, because the playground is built into the page. Where this course lives makes that assumption load-bearing. NPTEL is a MOOC; I never meet the students and there are no dedicated labs. A student might be on a laptop shared with a parent, on Windows 11, on a tablet with an external keyboard, or on some machine you would not expect to still be in use and that OCaml very likely does not support. Around 170 people have enrolled so far, and I do not want a single one of them to give up on OCaml over an installation problem in the first hour. So the book is purely client side. The website *is* the textbook: There is no separate textbook to buy or download. Every lecture in this course is also a page on the course website, and the slides you see in the videos are excerpts from those pages. The website is the book: the same material, expanded into prose, with the examples runnable in place and the quizzes interactive. Open it in any browser; no login, no install, nothing to download. None of the individual pieces are new. Running OCaml in the browser has been possible for years: the official [playground at ocaml.org](https://ocaml.org/play), [TryOCaml](https://try.ocamlpro.com/), [sketch.sh](https://sketch.sh/), and `x-ocaml` itself, which this book is built on. Emulating a whole CPU in the browser is not new either, and the quiz idea comes straight from the Brown group. What I think is new is the assembly: one course where the prose, the slides, the runnable cells, and a real Linux machine are a single artifact, kept correct and on-pedagogy by its own tooling. The rest of this post is about that assembly. ## The book is the slides is the notebook There is a second reason the page matters as much as the video. When I teach CS3100, the executable notebook *is* the slide deck, thanks to the [RISE](https://rise.readthedocs.io/) extension that turns Jupyter cells into a [reveal.js](https://revealjs.com/) presentation. Students ask questions, and I answer them by live coding in the same surface I am presenting from. This book rebuilds that idea, but purely in JavaScript. One markdown source produces the lecture webpage, a reveal.js slide deck, and the runnable cells, all from the same file. Since NPTEL videos show only the slides, the slides have to carry the full content, and because they are generated from the same source as the prose, they cannot drift away from it. More on that machinery below. ## How it is built: two tiers Under the hood there are two tiers of execution. The **light tier** is the cell you ran above. It is the [ x-ocaml](https://github.com/art-w/x-ocaml) WebComponent (Arthur Wendling’s work), an OCaml 5.4 toplevel compiled to JavaScript with [. What makes it feel like a real editor rather than a text box is that](https://github.com/ocsigen/js_of_ocaml) `js_of_ocaml` [Merlin](https://github.com/ocaml/merlin)runs inside it, in a Web Worker: hover over any expression and you get its inferred type, you get autocompletion as you type, errors are reported inline, and [will tidy the code on request. Scroll back up and hover over](https://github.com/ocaml-ppx/ocamlformat) `ocamlformat` `greeting` in that first cell; the type appears without your running anything. It all runs entirely in the tab, your edits persist in local storage, and the whole functional-programming half of the course lives in cells like it. I have written before about [embedding x-ocaml in a blog](/ocaml/x-ocaml/blogging/2025/06/20/xocaml/); this course is what that experiment grew into. The **heavy tier** is for when a toplevel is not enough. To run a test suite, measure coverage, compile and run a C program, or build and boot an operating system, you need a real project on a real machine: `dune` , several files, a test runner, a C compiler. So the later modules embed a *full 32-bit Alpine Linux machine* that boots inside the browser tab, using the [v86](https://github.com/copy/v86)x86-to-wasm emulator. It resumes from a compressed snapshot rather than cold-booting, serves its filesystem lazily over 9p (you download only the chunks your commands actually touch), and ships with OCaml 5.4 bytecode, `dune` , and [preinstalled. It is about 12 MB to an interactive shell. The promise, quoting the course intro, is the same as the cells:](https://gcc.gnu.org/) `gcc` nothing is installed on your computer and nothing runs on a server; the entire machine runs in the page. Here is one, embedded in this post exactly as it appears in the course. Click Start, wait a few seconds for the snapshot to load, and you land at a shell in a `hello` project. Try `ls` , or `dune exec ./hello.exe` to build and run it, or `cat hello.ml` . It is a real Linux machine, booting in this tab, fetching the disk image on demand from a CDN; nothing is installed on your computer. That a student can compile and run real C, or boot a unikernel, on a shared Windows laptop with nothing but a browser tab still feels a little unreasonable to me, in the best way. The two tiers trade off very differently, and not only on size. The light cell is OCaml compiled straight to JavaScript, so once the one-time bundle has loaded (about 17 MB gzipped, then cached by the browser) it runs at JavaScript speed: type, Run, done. The VM is the opposite. You are running OCaml bytecode inside a Linux guest inside an x86 machine emulated in WebAssembly, several layers of emulation deep, so it boots in a few seconds and then runs noticeably slower than a real machine would. That is why the light tier carries most of the course and the VM comes out only where a real build genuinely needs it. In both cases “zero install” means nothing is left on your machine, not that nothing is downloaded. ## How I wrote the course: teaching the model how to teach Here is the honest version of how the chapters got written. I have recorded video lectures for CS3100, my “Paradigms of Programming” course at IIT Madras (the [lectures are on YouTube](https://www.youtube.com/watch?v=9R8Oim7YU20&list=PLt0HgEXFOHdkE-NTs87s7QjwYwqeihb-D)). The pipeline that turns those into drafting material is [in the repo](https://github.com/fplaunchpad/ocaml_nptel/tree/main/tools/video-pipeline): [ yt-dlp](https://github.com/yt-dlp/yt-dlp) pulls each video from that playlist, [extracts the audio and uses scene detection to pull out the slide stills, a local](https://ffmpeg.org/) `ffmpeg` [Whisper](https://github.com/openai/whisper)model (run on my laptop via Apple’s [MLX](https://github.com/ml-explore/mlx)) transcribes the audio, and a small script aligns each slide with the narration spoken while it was on screen. The output is a drafting view that pairs every slide image with, in my words, what I said about it. That is a good starting point for a chapter: the model can see the slide and read the explanation. The first drafts were rougher than I expected. The *content* was all there; what was missing was the pedagogy. A draft would lean on an idea a few paragraphs before introducing it, or state a new concept flat instead of setting up the question it answers. The order was the order the slides happened to be in, not an order designed to teach. The effect was a chapter that was technically correct and pedagogically flat: everything present, nothing sequenced to actually carry a reader from not-knowing to knowing. So the real work became encoding *how to teach* in a form the model could apply consistently. That turned into a growing set of feedback notes, accumulated as persistent memory the agent loads every session. A few of the recurring ones: **No forward concepts.** Each module introduces one tool; earlier lectures stay inside the toolbox built so far. Before writing any example, ask what is in the student’s toolbox at this point.**Slides carry the content.** Most students only watch the videos, which show only slides. Every derivation, worked example, and comparison the student needs has to be on a slide, not gestured at.**Fresh activities.** An exercise must not ask for a function the chapter already walked through, even renamed.**No jumps.** The audience knows C and data structures, not FP and not type theory. Every new idea is motivated before use and reached by small steps. This one outranks “be thorough” and “show the powerful example.” Later modules came out noticeably better than earlier ones, because the notes were richer by the time I got to them, and because I could re-run the review over earlier chapters with the accumulated rules. The book should be read as a set of lecture notes rather than a polished textbook. It borrows organisation and broad ideas from [Cornell’s CS3110](https://cs3110.github.io/textbook/) and [Real World OCaml](https://dev.realworldocaml.org/), alongside my own CS3100 notes, but I chose the examples and co-developed them deliberately rather than letting them be generated wholesale. ## Under the hood: an executable, self-checking book Once you have written down how the book should teach, how do you keep 345,000 words of interactive material from quietly violating those rules as it grows? By hand, you do not. So the build pipeline does the checking. **The book is executable and checked in CI.** Every runnable ` ``` ocaml ` cell in the lectures is compiled and run by ``` dune runtest ``` (via [ ocaml-mdx](https://github.com/realworldocaml/mdx)) on every change. If an example stops compiling, the build fails. There are two nice details here. The test prelude caps the bytecode stack so that a `Stack_overflow` demo trips in CI at the same depth it trips in the browser, instead of grinding for minutes; and it de-fangs [OUnit2](https://github.com/gildor478/ounit)’s argument parsing and exit so that the very same test-suite cells a student runs in the page also run green in CI. The code in the book cannot bit-rot. **One markdown source, three outputs.** I write lectures with [Pandoc](https://pandoc.org/)-style fenced divs: ``` :::slide ## Pattern matching - Match deconstructs and branches in one step ::: :::quiz code id=bmi Write `bmi : float -> float -> float`. ``` ocaml let bmi mass height = failwith "not implemented" ``` ::: ``` The build (a small OCaml program) turns those into the webpage, the reveal.js deck, and the runnable or checkable cells, all from one file. The slides cannot drift from the prose because they are generated from it. **Checks beyond “does it compile.”** One script walks every coding exercise and flags any that ask the student to reproduce a function the chapter already defined right above it, a repeat the early drafts kept slipping in. Alongside it run a per-slide overflow check (every slide must fit a 1280x800 canvas, verified by driving a headless browser), a cross-reference and anchor checker, and a single pre-recording gate that runs all of it before I record a lecture. **A composable in-browser toplevel.** The testing module needs [QCheck](https://github.com/c-cube/qcheck) and OUnit2 available in the browser cells. Rather than ship a second, heavier toplevel, those libraries are layered *onto* the existing one using a small `js_of_ocaml` patch (`--toplevel-extend` ) plus a shim that isolates the extension’s domain-local state, so that Merlin’s types-on-hover keeps working in the same page. Getting these bundles small enough to ship was its own adventure, which I wrote up in [shrinking the OxCaml js_of_ocaml bundle from 285 MB to 4 MB](/ocaml/oxcaml/modes/2026/05/10/shrinking-the-oxcaml-bundle/). One more small thing I am quietly proud of: each page is stamped with the commit SHA of the source it was built from, and quizzes carry stable ids, so the anonymous feedback (next section) correlates to an exact version of the book and reordering questions never silently re-attaches old answers to a new question. All of this is in the open. The [course repository](https://github.com/fplaunchpad/ocaml_nptel) is public: the lecture content is under CC BY-NC-SA, and the build toolchain (the markdown-to-site compiler and the quiz backend) is ISC. If you teach OCaml and want the pipeline, the fenced-div system, or the in-browser VM tooling, take it. ## Learning from the learners I am borrowing an idea from the [Brown PLT group’s quiz study](https://rust-book.cs.brown.edu/) for the Rust book. The lectures carry inline quizzes that come, as the intro puts it, in two flavours: multiple-choice questions with explanations, and code-completion challenges where you fill in a function and click Checkto run a set of tests against your solution. Because the code quizzes run their tests in the browser, a code-completion question gives a real pass or fail, not a self-assessment. It is the same cell machinery as the rest of the book: a stub to fill in, a Run button, and a Check that runs hidden tests against your answer. The quizzes matter to me because of the feedback loop. The site records anonymous responses: a random per-browser id, no account, no IP address, no personal data, not even a copy of the code you type. I get to see which questions trip people up and fix the material around them. The privacy page has a per-device opt-out and a delete-my-data button. I would much rather find out where readers actually get stuck than guess. ## What is in the book Nine of the twelve modules are recorded; I expect to finish the last three in a week or two. The shape is eight modules of functional programming (values and types, functions and recursion, algebraic data types, pattern matching, higher-order functions, modules and functors, and effects) followed by four on building real systems: testing, memory safety, OxCaml, and unikernels. A few highlights of the content itself. The **memory-safety module** is the one I find hardest to believe works. It is the full Linux VM, in the page, and students compile and run real C while watching buffer overflows, use-after-free, and undefined behaviour happen live. No install, no separate sandbox, on whatever machine they happen to have. The **testing module** has come together really nicely: unit testing with OUnit2, property-based testing with QCheck, and model-based testing, all runnable in the browser. Testing is a natural on-ramp to thinking about correctness, and being able to actually run a shrinking counterexample in the page makes the ideas land. The **OxCaml module** is the most fun and the most volatile. It grows out of the OxCaml lecture in [CS6868](https://fplaunchpad.org/cs6868_s26/), my concurrent programming course at IITM, and covers locality and stack allocation, uniqueness, linearity, contention, and portability: the mode system that gives data-race freedom and allocation control. It is very new and very likely to keep changing, which is exactly the point. What is the fun in only teaching things that have already ossified? If you want the deeper version of this material, I have written about [data-race freedom in OxCaml](/ocaml/oxcaml/x-ocaml/blogging/2026/05/07/data-race-freedom-in-oxcaml/) and [capsules](/ocaml/oxcaml/modes/blogging/2026/05/08/capsules-in-oxcaml/) separately. The ** MirageOS module** at the end builds a unikernel from OCaml: a library operating system, virtualisation for isolation, and language safety, brought together into a single specialised VM. I will be honest that this module is less hands-on than the rest. A 32-bit VM under wasm cannot build a unikernel quickly, and full qemu emulation in the browser would be painfully slow, so the interactive surface is thinner here. The thing I would love to reach is booting a *compiled*unikernel directly in wasm via [WASI](https://wasi.dev/), with no Linux host underneath at all. That would make the last module as live as the rest. ## LLM use, with the receipts I wrote this book with an LLM, mostly [Claude Code](https://www.anthropic.com/claude-code), and reviewed all of it myself. Here is the lifetime token usage for the repo: | Category | Tokens | |---|---| | Input (fresh, uncached) | 3.1M | | Output | 36.1M | | Cache creation | 168.2M | | Cache read | 11,055.2M (~11.1B) | | Grand total | ~11.26B | By model: Opus 4.7 about 5.1B total (14.3M output), Opus 4.8 about 5.1B total (17.4M output), and Fable 5 about 1.1B total (4.4M output). How to read this. The headline 11.3B is dominated (98%) by cache reads, which are billed at roughly a tenth of the input rate and are huge only because every turn re-reads the conversation from cache. The figures that reflect real work are output (36M) and cache creation (168M) plus fresh input (3M), call it about 207M tokens of non-cached traffic. At rough Opus list rates that lands somewhere around 2,800 to 3,000 US dollars over the lifetime of the repo, split roughly evenly between Opus 4.7 and 4.8 with Fable adding about ten percent. What actually helped, beyond drafting? Two things. The first is fearless, though not perfect, refactoring. “Move this example to that other module, and rewrite everything downstream so it still makes sense” is a request I made constantly, without worrying about the breakages it would cause across two dozen files. The history is full of these: a wholesale redesign of the secure-systems modules, a restructuring of the unikernels module from six lectures down to four, a reframing of a lecture around effects and a typed stack machine. The shape of the development is visible if you plot it: 392 commits over about 25 days. Most of the lecture text lands in the first three days; after that the cumulative line count is almost flat, while the commits keep coming. That flat-but-busy stretch is the point: the bulk of the effort after the initial draft is rewriting in place, not adding, and about a quarter of all commits are explicit review, audit, or sweep passes. (A caveat on honesty: some individual diffs look enormous, hundreds of thousands of lines, but those are regenerated `js_of_ocaml` and Wasm bundles committed to the repo, not prose. The line count above is lecture markdown only.) The second is review. I have the LLM read chapters back against the pedagogy notes to catch content that came out of turn: an idea used before it was introduced, an exercise that duplicates the chapter, a slide that overflows. This is the same agentic-review pattern I used for proofs in [from convergence to confidence](/verification/rdts/lean/2026/04/28/from-convergence-to-confidence/), pointed at prose instead of [Rocq](https://rocq-prover.org/). There are surely still bugs in the book. For those I take responsibility; the review was mine to do. ## Where this is going: a book that evolves with the reader Here is what I wish for next. Imagine the book ships with an LLM that acts as a tutor. It sets exercises, takes your feedback, and dynamically rewrites parts of the book as you read, keeping the difficulty where it should be for you specifically: enough challenge to stay engaged, not so much that you give up. For the coding parts, the tutor can close its own loop: write a program, compile it, test it, and only then generate a question from it. That way the questions are produced autonomously but with a real notion of correctness behind them, rather than hallucinated. Typed languages look especially well suited to this. OCaml’s compiler is a correctness oracle the tutor can lean on, and the entire compile-and-test loop already runs client side here, the light tier for cells and the full VM for real projects, so the tutor needs no server either. The anonymous feedback signal is the seed of this loop, and the LLM-authoring pipeline is the existence proof that the rewriting half is feasible. The best way to learn is still to poke at something and see how it reacts; a book that pokes back, and adjusts, is where I would like this to go. ## Enrol If you would like to learn OCaml this way, the course is [open for enrolment on NPTEL](https://onlinecourses.nptel.ac.in/e-learning/preview/noc26_cs90) until 27 July 2026, and it is free. Or just [open a lecture](https://fplaunchpad.org/ocaml_nptel) and poke at it.